New Extender Setup – A Complete Guide To Reset Netgear Extender!

Facing an issue while regulating the process of new Netgear setup is quite common, whether you are a newbie or a frequent user! Every device is different and can face multiple issues depending upon the type of device you are using and the ease of establishing connections. But the main part is when you deal with these issues. If you have faced issues related to your standard for the very first time, then keep in mind there is not much need to worry about.

This small guide is perfect to get entire knowledge about the working, use, and benefits of extenders in a day to day life.


 If you just brought a new extender and want to complete the login steps by following the right procedure, then the following are some of the best guidelines that you can have to complete the whole process without facing much hassle.

  • The very first thing is to open the box of your brand name Wi-Fi Range Extender.
  • Next, you will need to plug in the extender in a reliable power socket.
  • As a result, the LED light on the extender will start blinking. It will be appropriate if the light blinks up in solid green color. It will mean that the connections are established properly. Anyhow, if the lights of the standard blink up in red color, then you will need to recheck your all cables and connections to find the issue.
  • Once the light turns out to be green, the next step is to connect your extender with the router as well as the computer system using a reliable Ethernet cable. You can also maintain connections wirelessly.
  • After the connections are built-in, you can launch a new web browser in the computer system of your choice.
  • In the address bar of the browser, you will need to enter the right IP address Click ENTER.
  • As a result, you will reach the login admin of the extender.
  • Then you will be asked to enter the required username and password. In this space of username, you can type in ADMIN, and in the space of the password, you need to type in PASSWORD or keep the column vacant. If you don’t know the required password as well as username, you can take the help of the user manual to get the essential details.
  • Click on login after you fill in the default credentials right.
  • As a result, you will reach the settings page of the extender.
  • Hereby, you will get the access to make alterations and changes in the required settings of the extender.

Congratulations, you have successfully logged in to your extender and now you can explore its benefits without any hassle.


Before you start resetting your Netgear extender, there are some points that you need to consider in advance, especially if your Netgear extender is not working and you are unable to log in to your extender.

  • Make sure that you have a well-fitted AC power outlet to supply power to your device.
  • If you are not sure, then it is advised to go wirelessly and don’t use the Ethernet cable to maintain connections between the different devices. The reason is it will make the whole process difficult to handle. Along with that, the existence of a damaged or loose connection will lead to issues with the power supply and connectivity.
  • It is advised to boot your device properly once you restart the same. Yes, you can ace various issues during the resetting process especially when the booting process gets interrupted by any means.
  • Other than that, it is recommended to make up a list of all the necessary changes that you have done in the settings of the extender. This will include things like WiFi network name (SSID), channel numbers, password, LAN, WAN, WLAN, security settings, etc.

All in all, these are some of the essential points that you need to keep in mind while resetting your extender.


You can reset the wifi extender using multiple ways and here we are discussing the following:

  • Using the Reset Button:

Start with plugging in the extender in the power socket of your choice and make it blink for a while.

Find the factory reset button on the device. You can use a pin or any other thick device to start the process. All you need is to press that button for a while.

Congratulations, your Netgear wireless extender has been reset successfully. As per your requirements, you can make changes in the settings part.

  • Via the Web-user Interface:

If you are unable to find the reset button on your extender, then there is no need to worry. You can use another method i.e. Web-user Interface through which you can factory reset your Netgear extender. Check out the following steps to make the new extender setup process easy:

  • Start with switching on the Netgear WiFi range extender.
  • Open a web browser of your choice and fill in the IP address in the given space.
  • Then you will need to reach the default web user interface of your device.
  • As a result, you will see a login window on your screen.
  • Hereby, you will need to fill in the required details properly.
  • Once it is done, you can hit the login button.

After this, the Netgear smart wizard will appear in front of you where you can click the factory reset button and confirm your decision on the confirmation screen by hitting the yes button.


If you are working with the extender for the very first time, then the above-mentioned information related to the new extender setup mywifiext as well as the reset process will help you avoid unnecessary mistakes. This will in turn save your time as well as effort. If you are facing any kind of issues related to the setup of the research process of the extender, then it is advised to take professional help by consulting the right experts.

Alen Parker

Guest Blogger | SEO Outreach | SEO