4 Reasons Your Toilet Wax Ring Went Bad
Do you know that the average person flushes the toilet about 5,000 times a year? That’s quite a bit of wear and tear on your toilet wax ring! So if you’re experiencing problems with your toilet, it may be due to a bad wax ring.
This article will discuss four common reasons why your wax ring went bad. It will also quickly provide instructions for RWROT, aka replacing wax ring on toilet 🙂
1. Faulty Installation
One of the top reasons your wax ring goes bad is faulty installation. If the wax ring isn’t installed correctly, it won’t be able to create a proper seal. As a result, it will cause leaks, eventually leading to your wax ring going bad.
Here’s how the installation happens:
Your wax ring sits between your toilet bowl and the drainpipe, and a rubber or plastic flange should protrude from the drain pipe. The flange should be level with the floor and sit above the finished flooring material.
If the flange is installed too low, it could cause leaks. If installed too high, it could prevent the wax ring from seating properly. You’ll need to remove the toilet to reset the flange at the proper height.
If you’re unsure how to install a wax ring, it’s best to leave it to a professional plumber. They use equipment like a toilet flange installation tool to ensure the wax ring is installed correctly.
2. A Loose Toilet Flange
The flange is the part of the toilet that secures it to the ground and keeps sewage from coming back up through your drain. If your flange is loose, it can cause your wax ring to fail.
To check if it is loose, remove the toilet and look at the bottom. The bolts that hold down the flange should be tight, and the flange should not be wobbly. If the flange is loose, you’ll need to tighten it or replace it.
If it is rusted, you may also need to replace it. A rusted flange can cause leaks, leading to a failed wax ring.
3. Too Much Water Pressure
The water pressure in your home might be too high. If the water pressure is too high, it can cause the wax ring to fail. You should check the water pressure in your home and see if it is within the normal range. If it is not, you should contact a plumber to have it fixed.
An expert plumber will be able to tell you if your water pressure is too high. They can also help you fix the problem so that your wax ring does not fail in the future.
4. Severe Weather Conditions
If you live in a place with severe weather conditions, this could be the reason your wax ring went bad. For example, when the temperature dips below freezing, the water in your toilet bowl can freeze and cause the wax ring to crack. If this happens, you’ll need to call experts to replace it on the toilet.
Final Thoughts
Toilet wax rings are one of the most critical components of your toilet. Without its properly functioning, your toilet will not be able to flush properly, which could lead to expensive repairs.
Hopefully, now you know a little more about RWROT, replacing wax ring on toilet. And if you think your wax ring may be failing, it is essential to replace it as soon as possible to avoid any further damage.
