Deep Cleaning Your Bathtub the Right Way

The weekend has arrived, and you wish to relax. You want to draw yourself a bath and read your favourite book while sipping wine. However, the unused bathtub has accumulated dirt, and you require to deep clean the bathtub and may wonder how to go about it.

Alternatively, you may be checking out a bathtub for sale and wish to learn about the process to deep clean and maintain it. 

The company advises certain dos and don’ts and chemicals you need to steer clear while cleaning your bathtub. Keep in mind those pointers and collect all the tools you will need to clean your bathtub thoroughly. 

This post highlights the deep cleaning process for your bathtub. Read on! 

Collect Your Tools: Cleaning Supplies You Will Need

Scrubbing off the dirt and grim requires you to be equipped with the best cleaning supplies to speed up your job. Check out the list to collect everything you need to deep clean your bathtub.

• Baking soda
• Bleach
• Lemon juice 
• Household cleaning gloves
• Dish soap
• Microfiber cloth
• Sponge 
• Scrub brush
• Spray bottle
• White vinegar

Step By Step: Deep Clean Your Bathtub 

Now that you are equipped to deep clean your bathtub, you should check out the step-by-step process to get started. 

Step 1: Cleaning Agents

The first stage is to put on gloves to protect your hands from the harsh chemicals of the cleaning agents. Next, choose a tile and tub cleaner, or you can also use white vinegar, lemon juice, and baking soda. 

Carefully spray the cleaner all over the tub and make sure to cover the bathtub drain and the corners.

Now, let the cleaner sit on the surface for at least five minutes. 

Step 2: Scrub

It’s time to get rid of the tough stains! You will need to scrub brush or an abrasive brush for this step. Alternatively, you can also use some elbow grease. While scrubbing, pay more attention to the corners and grout lines as they may have accumulated dirt. 

Step 3: Rinse 

After scrubbing off the stain, you will have to rinse the soap and dirt. You can use hot water if the stains are stubborn and require another round of scrubbing. Even if you think you have done an excellent job cleaning off the dirt, you may use hot water as an additional deep cleaning process. 

Step 4: Dry

Many individuals skip this step as they think it isn’t as important as other deep cleaning steps. However, drying is equally essential. Why? This is because rinsing removes a lot of residues, but the excess moisture retained by the tub can lead to mildew and mould build-up. 

So, dry your bathtub after using it each time. 

Cleaning Mould and Mildew in The Bathtub

Mould and mildew may build up in the bathtub due to excess moisture. This is why drying your bathtub after every use can save ample time for cleaning. Still, environmental conditions can lead to mould and mildew development at certain times. 

Take a look at the steps to clean the mould and mildew build-up.

1. Use toilet bowl cleaner on the areas consisting of mould and mildew.
2. If the build-ups are in the corner, squirt the toilet bowl gel into the corner and cover it with a paper towel. 
3. Leaving the gel overnight or for at least an hour. This is because the bleach needs time to work through some mouldy surfaces. 
4. Now, wash the tub with a scrub brush. 
5. Lastly, rinse the tub with cold water. 

Wrapping Up

Tough stains on the bathtub need deep cleaning. Plus, it is best to deep clean every once to avoid any dirt or mould accumulation. If you have been using your bathtub for a very long time and notice that the surface has been degrading, it might be time to change it. 

You may need to check out a bathtub for sale to replace your old one as it may be unhealthy to continue using it.