Netgear Router Firmware Update Failed? Here’s the Fix!

You need to update the firmware of your Netgear Nighthawk router from time to time to ensure that it functions properly. Understood. But, what if your Netgear router firmware update failed? Then what? Have no idea? No problem!

In this article, we’ll provide you with the topmost troubleshooting tips that’ll help you in getting rid of the router firmware update failure issue. On the off chance, if the issue persists, don’t hesitate to get in touch with our highly experienced technical experts.

Troubleshooting: Netgear Router Firmware Update Failed

Basic Troubleshooting Tips

Before getting down to the advanced troubleshooting tips, let’s first start with the basics. Hopefully, taking care of the basics might resolve the issue at hand.

  • Check the Hardware

Start by checking the hardware of your WiFi device. Is the wall socket your WiFi router is plugged into damaged? Is the power cable connecting your device to the adapter is worn out? Consider these points. If any part of your router’s hardware is damaged, get it fixed immediately! Or even better, you can plug your router in a different wall socket.

  • Distance Your Router from Electronic Devices

If your Netgear router is surrounded by electronic devices, you are bound to face technical issues. Thus, make sure that you place your device away from cordless phones, washing machines, baby monitors, Bluetooth speakers, microwave ovens, treadmills, televisions, or any other device that can cause signal interference.

  • Say NO to Reflexive Surfaces

Also, keep reflexive surfaces like mirrors and fish tanks away from your Nighthawk router. Such surfaces too can create disturbance in the WiFi signals of your device.

  • Power Cycle Your Netgear Router

Another thing that you can do in order to get rid of the Netgear firmware update failure issue is to power cycle your device. Relax! Restarting your device won’t take much time. All you need to do is, unplug your device, wait for some time, and plug it back in again.

What happened? These basic tips weren’t really of any help to you? Worry not! Walk through the advanced troubleshooting tips mentioned below.

Advanced Troubleshooting Tips

The tips mentioned below will surely help you in troubleshooting the Netgear Nighthawk router firmware update failure issue. Thus, scroll down, and read on.

  • Check Your Internet Connection

A weak internet connection is one of the major reasons why your Netgear router firmware update failed. Therefore, see that your Nighthawk router has access to a blazing fast and seamless WiFi connection. To ensure that, connect your router and modem properly. Instead of connecting your devices wirelessly, make use of an Ethernet cable.

Once a proper connection between your Netgear WiFi router and modem has been established, perform Nighthawk router login and try to update the firmware of your device.

  • Perform Factory Default Reset

Restoring your Netgear router to its factory default settings is another thing that you can do in order to successfully update its firmware. Mentioned below are the instructions that you need to follow in order to reset your WiFi device:

  • Power on your Netgear Nighthawk router.

  • Create a connection between your router and modem.

  • Open up a web browser on your laptop and access routerlogin.net.

  • Click on Advanced > Administration > Erase.

Now, wait for some time for your Nighthawk router to get restored to its default mode.

Conclusion

The troubleshooting tips mentioned in this article will surely help you in fixing the Netgear firmware update failure issue. Once you reset your WiFi device, access 192.168.1.1 default IP and follow the on-screen instructions to perform firmware update.

If by any chance, your Netgear router firmware update failed, feel free to reach out to our experienced technicians. They are available 24/7 to assist you.

Also you can read about the best laptops under 50000.

Alen Parker

Guest Blogger | SEO Outreach | SEO