Netgear EX3700 Extender Not Broadcasting SSID? Let’s Fix!

Netgear EX3700 extender not broadcasting SSID (WiFi network name) has become one of the biggest issues for many users across the globe as they are unable to get connected to Netgear_ext SSID. Well, don’t sweat over it! There can be various reasons why your Netgear EX3700 extender is not showing up SSID. Let’s make you familiar will all reasons so that you can get rid of the issue instantly. Let’s get started, shall we?

Reasons Causing Netgear EX3700 Extender Not Broadcasting SSID Issue

Placement of Your Netgear EX3700 Extender

On the off chance if you have kept the Netgear EX3700 extender away from the reach of your existing router’s WiFi signals, then bear in mind that it will not appear in the list of available and active WiFi networks. Thus, it is suggested to place your Netgear EX3700 extender at a location where it can easily fetch the WiFi signals of your main router.

WiFi Obstructions are in the Way of Your Netgear EX3700 Extender

In the event that there are certain interference-creating WiFi obstructions located closer to your extender’s WiFi signals, then also you may experience “Netgear EX3700 extender not broadcasting SSID” issue. To fix the issue, it is suggested to keep your Netgear extender and router away from interference-creating WiFi devices and choose a higher and open location for them.

Cross-Check the Connectivity

The Netgear EX3700 extender not broadcasting SSID issue can also be due to improper or loose WiFi/ Ethernet connection. For this, you have to ensure that your extender and router are properly connected to each other at the time of Netgear EX3700 setup and receiving sufficient power supply from their respective wall outlets.

Check the Installation

Ensure that you have properly completed the Netgear EX3700 setup. Bear in mind – if your extender is improperly or partially configured, then also you may experience Netgear EX3700 extender not broadcasting SSID issue.

Update the Netgear EX3700 Extender’s Firmware

If the firmware of your Netgear EX3700 extender is outdated, then also the annoying issue will continue to trouble you. So, to get the best performance of your Netgear WiFi range extender, access its default web-based setup page via www.mywifiext.net web address, search of the latest updates for your EX3700. If you find any new update, follow the on-screen instructions and download and install it right away.

Note: For Apple or Mac OS users, visit the web-based setup page of your Netgear EX3700 extender using mywifiext.local.

Still Facing the Same Issue?

If the troubleshooting tips cited above haven’t helped you out to fix Netgear EX3700 extender not broadcasting SSID issue, don’t fret. Give the fixes listed below a try and troubleshoot the issue for you

  • Reboot or power cycle your Netgear WiFi range extender along with your router. For this, unplug your devices and plug them back in again. It is suggested to plug in your router first.
  • If you have connected your Netgear extender and router using an Ethernet cable, then try connecting them both in a wireless manner.
  • Move your Netgear extender more closer to your existing router. Apart from that, check if your SSID is hidden or enabled. Hiding the WiFi network (SSID) is one of the effective ways to secure your internet from potential threats but it can also result in Netgear EX3700 extender not broadcasting SSID issue.

That’s all! Share with your fellow readers which method helped you out to fix Netgear EX3700 extender not broadcasting SSID issue. Just in case you are not able to fix the issue even after trying the troubleshooting tips listed above, then without much delay, feel free to get in touch with the team of competent technical experts for quick assistance via comments.

Alen Parker

Guest Blogger | SEO Outreach | SEO